Residential Model RW-10


Commercial Model CW-2

 

The signal cable is wrapped externally around pipe. The HardWaterWizard produces a square wave alternating at 1,000 to 12,000 cycles/sec. The complex modulated signal field at variable frequency – induces an electrical field in the pipe which alters the hard water ions and increases their solubility. The incoming water containing calcium and other mineral ions in solution is acted on and becomes less saturated with calcium and able to dissolve existing scale.

HardWaterWizard electronic water conditioner

Alternative to water softeners removes existing scale and prevents new scale deposits from forming. Eliminates the
use of chemicals and brine discharge.

Benefits











Keeps hard water deposits from forming
Removes existing scale in 90 days
Treats water up to 120 grains*
No maintenance-set it and forget it operation
Reduces detergent use
Increases water heater efficiency
Compact and Easy to install
No plumbing or special skills needed
No salt or chemicals used
2 year limited warranty

*Treats up to 120 grains with the proper model and application

 
The HardWaterWizard (tm) produces an oscillating electric field in the water pipe which changes continuously in frequency and direction. This changes the property of the hardness minerals so they stay in solution.
   

The HardWaterWizard is an excellent choice for home-owners who want conditioned water but don’t want the salt contamination, maintenance effort and expense for ion exchange softeners. Uses less than 10-watts of electricity and will work on plastic, copper and steel pipes. Comes complete with converter, signal cable, cable ties, transformer, mounting screws and instruction manual.



Download a Brochure.  

Residential Specifications
Enclosure: ABS plastic
Size: 10” x 6” x 1.5”
Shipping Weight: 2.5 lbs.
Coil voltage: 12 VDC
Power usage: <10 watts max
Operating temperature: -20 to 140F
Wall plug voltage: 110-240 volt, 60 Hz.
Signal Cable temp.: 196F max, 600 volts
Signal "on" light and operating light

Comes complete with electronic module, signal cable, cable ties, 110-240 volt power convertoer and instruction manual.

Commercial Specifications
Enclosure: ABS plastic
Size: 6.5” x 4” x 2.5”
Shipping Weight: 3.5 lbs.
Power Used: 110 volt, 20 watt max
Pipe Coil Voltage: 12 VDC
Signal Cable Temp: 196F max, 600 volt insulation
Red power on light indicates power is present, Green indicates coil connected and sinal generated, Red fail light should be off.

Comes complete with electronic module, signal cable, cable ties, 110-240 volt power convertoer and instruction manual.

 

RESIDENTIAL OPTIONS
Up to 1-inch pipe
Up to 1 1/2-inch pipe

COMMERCIAL OPTIONS
Up to 2-inch pipe CW-2
Up to 4-inch pipe CW-4
For larger units, consult the factory


RW-10
RW-15


CW-2
CW-4

     

 

 

 

PureWaterMachines l PureWaterCoolers l PureWaterConditioners l Other PureWaterProducts
Home l About Reverse Osmosis l FAQs l About Vertex

5138 Brooks Street • Montclair, California 91763 • 800-627-2146
inquiries@vertexwater.com

Vertex Water Products © 2013